T Rex 600CF, Spektrum DX&, 611, gyro, over $4K invest
Over $4000 invested inludes everything listed below
| Start Price |
USD 1,701.00 |
| Current Price |
USD 1,701.00 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
USD 3,000.00 |
| Reserve Price |
- |
| Start Time |
Thursday, September 04, 2008 |
| End Time |
Thursday, September 11, 2008 |
| Location |
Cicero, IN |
|
See more about 'T Rex 600CF, Spektrum DX&, 611, gyro, over $4K invest'
|
Description
Align T-Rex 600 (Pro) & Spektrum DX7 RTF Complete! Fully upgraded and RTF This is a complete Package; heli, charger, batteries, control and Spare parts! You will not find a better package deal on ebay. Only flown a few times for tuning, this was my newest heli fully set up and ready to fly. I love flying this heli. There have been many hours in set up and building. It is perfectly balanced and Tuned. Every option available is on this heli and is the best! I will show a pic of all the extra parts included…there are just too many to list, I am sure I will find more before the auction ends! Shipping: The heli will be shipped fully asm. RTF, less the blades. It will be professionally packed and shipped to maintain the precise tuning of the bird. Everything pictured WILL be included in the Auction (as it applies to the Heli) This Heli has never been crashed, only Adult/Professionally flown (3 hours, mainly tuning) Below is a brief list of what is included in the Auction: Align Trex 600 with Upgrades: $900.00 Thunder Power 5000mah batteries (3) $900 Thunder Power 1010 & 210: $300 Blades: V-Blades, Align Night Blades, Carbon Blades: $455 Spektrum Dx7: $350 JR8717 Cyclic Servos: $450 Futaba GY611: $490.00 8v Cyclic servo setup: $100 Align 100a Speed Control: $135 Custom Canopy & Tail: $100 Align Blade Case: $65 Spare Parts: $200+s Comes with Brand New Canopy in box Estimated Value: Over $4000! Listing Details: Align T-Rex 600 Carbon Fiber Features1. 600XL Electric Power System2. Carbon Frame3. Custom Painted Fiberglass Canopy4. Carbon Fiber V-Blades Tail Blades5. Triple-Bearing Block Main Shaft Support6. Fully Driven Tail Auto Rotation System7. Tail Rotor Drive Belt System8. Push-Pull Control Linkage9. Rear Tail Servo Mount10.10mm Hollow Main Shaft, 8mm SpindleSpecs:Length:1200mm (47.25 in)Height:388/405mm (15.25 in/16 in)Main Blade Length:600mm (V-Blades)Main Rotor Diameter:1350mm (53.15 in)Tail Rotor:240mm (9.45 in)Motor Drive Gear:10T (11T optional)Main Drive Gear:170TAutorotation Tail Drive Gear:180TTail Drive Gear:40TDrive Gear Ratio:1:17.0:4.5/1:15.45:4.5Weight (w/o main blade):1370gFlying Weight:Approx 3000g (6.6 lbs) Spektrum DX7 This is the MODE 1 VERSION! Tuned and ready to Fly (fully programmed) Key Features20-Model memoryAirplane and Heli softwareSwitch assignmentP-mixes3-axis dual rate & expo3-position flap (Airplane)5-point throttle curve (Heli)3 flight modes plus hold (Heli)Gyro programming (Heli)CCPM, 2-servo 90°, 3-servo 90°, & 3-servo 120°Configured to default, helicopter model type (all airplane programming is available) OverviewWith the DX7 you’ll be able to fly anything from micro electric helis, to big gas-powered IMAC planes without regard to frequencies and free from fear of interference. Calling this kind of thing “revolutionary” just doesn’t cut it. It is nothing less than a quantum leap in RC technology that will change how you fly forever. Never again will the availability of a frequency pin dictate when you can take off. Never again will you have to ask, “What channel are you on?” Never again will your flying experience be interrupted by model-generated RF noise, interference from commercial broadcast towers, or anyone on another RC system. Specs# of Channels:7Modulation:DSM2Band:2.4 GHzReceiver:AR7000Programming Features: Aircraft and HeliModel Memory:20 Model MemoryTransmitter (Tx) Battery Type:1500mAh Ni-MH Gyro the Mother of All Gyro’s!!! GY611 This is the Futaba GY611 Gyro with the S9256 Digital Servo. FEATURES: Super narrow pulse drive system substantially improves servo responseMicrocomputer high-speed arithmetic processing substantially improvesgyro responseHigh-resolution 12-bit A/D (Analog to Digital) accurately convertssensor output to a digital signalSMM (Silicone Micro Machining) micro-machining mechanical parts andsystems right on a silicone chip and also low-back aeroform caseimproves vibration resistance and neutral characteristicAVCS (Angular Vector Control System) (same as heading hold) systemrequires a high-precision angular velocity detection function andextremely small output drift by using a new type of gyro sensor.This minimizes rudder neutral position drift during flight andeliminates the need to trim the rudder during flight.Futaba S9256 digital servo is fully compatible withsuper narrow pulse drive and features high response (0.06 sec/60°)and Alumite case with heat sink to cool the motor INCLUDES: Futaba GY611 sensor, control amp, S9256 servo, mini screwdriver,3 sections double sided tape and instruction sheet SPECS: GY611 Ratings;Yaw-axis stabilizer for helicopter (rate gyro)Display Device: 8-character dot matrix liquid crystal displayOperating Voltage Range: DC 3.8V to 6.0VCurrent Drain: 70mA (@5.0V, including sensor)Dimensions: Amp 2.2"x 1.2"x 0.59" (57 x 32 x 15mm)Sensor 1.2"x 1.2"x 0.71" (30mm x 30mm x 18mm)Weight: Amp 1.19oz (34g)Sensor 1.05oz (30g) S9256 Servo RatingsDimensions: 1.6"x 0.79"x 1.4" (40mm x 20mm x 36.6mm)Weight: 2.01oz (57g)Speed: 0.06sec/60º (at 4.8V)Torque: 47 oz-in (3.4 kg-cm) (at 4.8V) Upgraded Align 100a speed control: Continuous current:100Amps with proper air flowSurge current:135AmpsSupporting motor types:2 poles to 10+poles in/outrunner brushless motorsSupporting maximum RPM:2poles=>190,000rpmSupporting input voltage:5.5V~25.2VSupporting battery types: Li-ion/ Li-poly 2~6 cells, Ni-Mh 6-18 cellsSize:72X28X14mmWeight:69gFeatures:Three programmable throttle speed settings to support quick throttle response.Govener Mode(governor speed controller、slow down system)Small and compact PCB design for ease of installation.Large heatsink for great thermal performance.High compatibility to work with 98% brushless motors in the market.Ultra smooth motor start design to run with all kinds of brushless motors.The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.The throttle has more than 200 steps resolution that provides great controlling sense.Users can use the transmitter to operate the motor setting by Super stylized CPU. Super Fast Top Performance Servos!!!: DS8717 Ultra Speed Cyclic Servo 8volt Set UP!Key Features * Blazing speed makes every heli incredibly responsive * Robust output for superb response in extreme maneuvers * Zero dead band assures JR’s legendary precision * Metal case helps dissipate heat * High frequency digital power pulses assure reliability * Superb holding powerSpecsType: Ultra Speed Heli Cyclic ServoTorque: 160 oz/in @ 4.8V; 196 oz/in @ 6VSpeed: .09 sec/60° @ 4.8V, .07 sec/60° @ 6VDimensions (WxLxH): .83" x 1.59" x 1.57"Weight: 2.36 ozGears: Metal This set up is running on an 8v system fully protected by a spectrum dual dropdown module! Powered by an EVORX: FLIGHTPOWER EVOLITE 2S 7.4V 20C 20A CONTINUOUS, 30C 30AMP BURSTS DIMMENSIONS: 23.7MM/96.0MM/11.8MMUnit Weight: 48 grams Thunder Power 22.2 Battery Packs! 3 are included! eXtreme V2 Voltage: 22.2V 6-Cell Weight (Grams): 726gDimensions (mm): 50x45x160Max continuous current: 25C (125A)Max burst current: 50C (250A) 3 Sets of Blades: Align T-Rex 600 CF night blades!.Each set of Night Blades is carefully constructed to maintain static balance for weight, these night blades provide excellent visual orientation for flying at night, use very bright LEDS and rechargeable Li-Ion battery (light weight, big capacity, long operation hour).Uses 3K carbon fiber material, and unique forming technique, improve anti-twist, suitable for extreme 3D flight.Specs:Shape: Symmetrical wingLength:600x55x7.5mmWidth:12mmShaft Diameter:4mm Weight:270g/setBalance stickerx2Night Blade Connector (3 pin)x3 V-Blades!!! 600mm Carbon Fiber - These are the best blades money can buy. No scuffs, scratches or any signs of use Also included are V-Blades Tail blades These are the lightest, stiffest best 3D blades on the market today!!! Also includes is an Align Blade Case for you spare blades…did I mention a extra set of Carbon Fiber Blades! Upgrades Align Metal Mixing Arms: T-REX metal SF mixing arm features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. Align Precision: Swash plate! T-REX 600 rotor head upgrade assembly features high precision bearing structure and high rigidity CNC processed aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stability of the flight.- Use for T-REX 600/600 Nitro.- CCPM Metal Swash plate x 1- Bearing 6806ZZ x 1(ƒ³30xƒ³42x7mm)- Long linkage ball x 1(ƒ³4.75x24.59mm)- Metal washout control arm x 2- Radius arm x 2- Washer x 4(ƒ³3xƒ³4.8x0.3mm)- Bearing FMR52ZZ x 4(ƒ³5xƒ³5xƒ³6x2.3mm)- Bearing 683ZZ x 4(ƒ³3xƒ³7x3mm)- Collar x 2(ƒ³3xƒ³4.9x1.5mm)- Linkage ball B3 x 8(ƒ³4.75x9.77mm)- Socket button head screw x 2(M3x12mm)- Socket screw x 4(M2x5mm)- Metal washout base x 1 All Bearings are in perfect condition, the tail has been upgraded to the Nitro version…most of the parts on this heli have been upgraded to Nitro parts as they handle add to the precision of 3D flight. Included Charger! Thunder Power TP 1010 Charger1-10 Li-Poly cells 10Ah up to 5 cells Communication port for TP balancer 160mm x 108mm x 47mm 220Watts Balancer also included: Thunder Power Balancer TP-210 TP210 Over $4000.00 Invested…..this is a Huge Value! Everything works Perfectly, This is a Dream Set up. This is for the big boys! Get on this. Select a picture Larger Picture
Place a Bid!
|
|
|
Search
Categories
More related categories
 |